Add: #6 Yanshan Rd,Xiepu town,Zhenhai district,Ningbo city ,Zhejiang province China
Excessive wear of components due to excessive wear of components in the hydraulic pump caused by the noise situation is more.The problem can only be confirmed by a thorough examination once the source is found.Once the dry environment becomes so bad, in addition to causing a decline in fault efficiency, it is more convenient to deal with.Therefore, such problems need to be solved in a timely manner.
In fact, several common hydraulic parts of the noise problem are relatively concentrated hydraulic winch, rotary device, the causes are nothing more than the following: 1, the removal is not completely.It is also very harmful to one's health, so it is easy to produce cavitation under high pressure.When hydraulic motor processing often encounter the problem of noise, noise of hydraulic cylinder of this kind of problem mainly because of the inside of the hydraulic cylinder and air residues, thus naturally formed the noise, if meet above conditions need to be done as soon as possible malfunction of hydraulic winch, air rotary device. Piping noise sometimes.
Therefore, the appearance of dead bend must be avoided in the layout, which is equivalent to the formation of cavitation phenomenon in the front cavity through tightening. Excessive dead bend of the pipeline can also produce violent vibration and thus generate noise, which is the most fundamental. In addition, hydraulic winch and rotary device.For the release of the clip should also be timely correction, 3 hydraulic winch, rotary device.4, the mixture of air in the oil will often lead to high frequency noise of the overflow valve.Therefore, the prevention of hydraulic winch, rotary device and such problems needs to be improved by adequate air isolation treatment.